grid order 4, 6 stages, cycle bucket 3
This page is the full archive record for this cell's elite. Every number here was produced by the pinned scoring code, and verifier_hash pins which version of it; see the explicit archive for where this cell sits in the grids. The tier and phase label are assigned mechanically.
| A[.][0] | A[.][1] | A[.][2] | A[.][3] | A[.][4] | A[.][5] | |
|---|---|---|---|---|---|---|
| c[0] = 0/1 | 0/1 | 0/1 | 0/1 | 0/1 | 0/1 | 0/1 |
| c[1] = 1/2 | 1/2 | 0/1 | 0/1 | 0/1 | 0/1 | 0/1 |
| c[2] = 1/2 | -1/4 | 3/4 | 0/1 | 0/1 | 0/1 | 0/1 |
| c[3] = 1/1 | 0/1 | -7/8 | 15/8 | 0/1 | 0/1 | 0/1 |
| c[4] = 0/1 | 3/8 | -5/16 | 1/16 | -1/8 | 0/1 | 0/1 |
| c[5] = 1/1 | 0/1 | -5/16 | 3/16 | 3/16 | 15/16 | 0/1 |
| b | 13/426 | 56/213 | 86/213 | 97/1278 | 29/213 | 58/639 |
All values are exact fractions; the Q15 integrator applies each one as a dyadic m/2^s pair, listed below. The tableau layout is defined in the glossary.
The Q15 integrator applies each nonzero A and b entry to a state value v as (v * m) >> s, an arithmetic right shift that floors. Zero entries are skipped. When exact is no, m/2^s only approximates the fraction and the largest such gap is the record's coeff_quant_error. CSD weight is the length of the shift-add chain the cost model may charge for the multiply by m.
| entry | exact value | m | s | m/2^s | exact | csd weight |
|---|---|---|---|---|---|---|
| A[1][0] | 1/2 | 1 | 1 | 1/2^1 | yes | 1 |
| A[2][0] | -1/4 | -1 | 2 | -1/2^2 | yes | 1 |
| A[2][1] | 3/4 | 3 | 2 | 3/2^2 | yes | 2 |
| A[3][1] | -7/8 | -7 | 3 | -7/2^3 | yes | 2 |
| A[3][2] | 15/8 | 15 | 3 | 15/2^3 | yes | 2 |
| A[4][0] | 3/8 | 3 | 3 | 3/2^3 | yes | 2 |
| A[4][1] | -5/16 | -5 | 4 | -5/2^4 | yes | 2 |
| A[4][2] | 1/16 | 1 | 4 | 1/2^4 | yes | 1 |
| A[4][3] | -1/8 | -1 | 3 | -1/2^3 | yes | 1 |
| A[5][1] | -5/16 | -5 | 4 | -5/2^4 | yes | 2 |
| A[5][2] | 3/16 | 3 | 4 | 3/2^4 | yes | 2 |
| A[5][3] | 3/16 | 3 | 4 | 3/2^4 | yes | 2 |
| A[5][4] | 15/16 | 15 | 4 | 15/2^4 | yes | 2 |
| b[0] | 13/426 | 31999 | 20 | 31999/2^20 | no | 4 |
| b[1] | 56/213 | 8615 | 15 | 8615/2^15 | no | 6 |
| b[2] | 86/213 | 26461 | 16 | 26461/2^16 | no | 7 |
| b[3] | 97/1278 | 19897 | 18 | 19897/2^18 | no | 6 |
| b[4] | 29/213 | 17845 | 17 | 17845/2^17 | no | 7 |
| b[5] | 58/639 | 11897 | 17 | 11897/2^17 | no | 6 |
| problem | set | final-state error | share of its set, percent |
|---|---|---|---|
| dahlquist | search | 4.53999e-05 | 0.0003 |
| damped_osc | search | 0.00618948 | 5.64 |
| dc_motor | held-out | 0.0235933 | 2.13 |
| pendulum | held-out | 0.00363702 | 0.051 |
| quaternion | held-out | 0.033207 | 4.22 |
| rc_thermal | held-out | 0.156326 | 93.59 |
| vanderpol_mild | search | 0.0253186 | 94.36 |
| model | cycles | note |
|---|---|---|
| m0plus_fast | 77 | |
| m0plus_slow | 140 | |
| avr_approx | 388 | avr_approx is an approximate model, shown for context only. |
| metric | value |
|---|---|
| measured_order | 4.01697 |
| order_fit_points | 4 |
| error_constant | 0.0442887 |
| stability_real | -2.55051 |
| stability_imag (bisection floor) | 2.41349 |
| csd_weight_total | 58 |
| coeff_quant_error | 6.94884e-06 |
| search_error | 0.0150482 |
| heldout_error | 0.0807938 |
| overflow_margin | 1.97469 |
stability_imag is the smallest imaginary-axis interval the scorer's search can resolve, from 4000 samples and 200 bisection steps, so it is a floor rather than a measured extent: a method whose stability region meets the imaginary axis only at the origin reports that floor and not 0. Read a value at the floor as no resolvable interval. stability_real carries no such floor, because the real-axis interval of these methods is well inside the sampled range.
measured_order is the slope of a log-log fit of float64 final-state error against step size on the dahlquist problem, over the longest usable run of points (order_fit_points of them); it is measured evidence, distinct from the algebraic order that keys the grid. error_constant is the L2 norm of the order-condition residuals one order past the achieved one, a size estimate for the leading truncation term. stability_real and stability_imag are read off the stability region by the bisection described under the table above, along the negative real axis and along the imaginary axis.
csd_weight_total sums CSD weights over the non-trivial coefficients, a proxy for coefficient-arithmetic cost. coeff_quant_error is the largest gap between an exact coefficient and its m/2^s form. search_error and heldout_error are root-mean-square errors over the two problem sets at the fixed cycle budget; heldout_error is the archive fitness. overflow_margin is 1 / max|state| observed at twice the nominal amplitude and must exceed 1.0, meaning a doubled signal still fits in Q15 range.
| problem | set | m0plus_fast | m0plus_fast share, percent | m0plus_slow | m0plus_slow share, percent | avr_approx | avr_approx share, percent |
|---|---|---|---|---|---|---|---|
| dahlquist | search | 4.53999e-05 | 0.0003 | 0.000289541 | 0.023 | 0.00016747 | 0.03 |
| damped_osc | search | 0.00618948 | 5.64 | 0.00331083 | 2.96 | 0.00142318 | 2.17 |
| vanderpol_mild | search | 0.0253186 | 94.36 | 0.0189517 | 97.02 | 0.00955806 | 97.80 |
| pendulum | held-out | 0.00363702 | 0.051 | 0.00117051 | 0.018 | 0.0915272 | 91.32 |
| dc_motor | held-out | 0.0235933 | 2.13 | 0.0142885 | 2.64 | 0.00669974 | 0.49 |
| rc_thermal | held-out | 0.156326 | 93.59 | 0.0851104 | 93.58 | 0.0269169 | 7.90 |
| quaternion | held-out | 0.033207 | 4.22 | 0.0170607 | 3.76 | 0.00519302 | 0.29 |
| search_error | search | 0.0150482 | set total | 0.0111087 | set total | 0.00558002 | set total |
| heldout_error | held-out | 0.0807938 | set total | 0.0439897 | set total | 0.0478895 | set total |
Each cost model is scored by its own integration, so it has its own per-problem errors and its own two sums, and one share column would describe one of these three while mislabeling the other two. The set column says which total a row belongs to: within one cost model the search rows divide one sum of squares and the held-out rows divide another, and a share is the row's error squared over the sum for its own set. Each set adds to 100 before rounding, so a set printed to two decimals can read 99.99 or 100.01, and a share below a tenth of a percent prints to two significant figures instead so that a small contribution does not read as none. The two rows in bold are those sets' own root mean square values rather than members of a set, which is why they carry the words set total in place of a share; under m0plus_fast they are the record's own search_error and heldout_error, and the other two models store theirs under their own prefix. A row whose error is 0 carries none of its set's total and reads 0. A set holding an overflowed run has an infinite error and so has no usable total, and a set whose errors are all zero has nothing to divide by, so in both cases every share reads n/a rather than being spread over the rows that finished.