grid order 3, 6 stages, cycle bucket 3
This page is the full archive record for this cell's elite. Every number here was produced by the pinned scoring code, and verifier_hash pins which version of it; see the explicit archive for where this cell sits in the grids. The tier and phase label are assigned mechanically.
| A[.][0] | A[.][1] | A[.][2] | A[.][3] | A[.][4] | A[.][5] | |
|---|---|---|---|---|---|---|
| c[0] = 0/1 | 0/1 | 0/1 | 0/1 | 0/1 | 0/1 | 0/1 |
| c[1] = 11/16 | 11/16 | 0/1 | 0/1 | 0/1 | 0/1 | 0/1 |
| c[2] = 5/8 | -5/16 | 15/16 | 0/1 | 0/1 | 0/1 | 0/1 |
| c[3] = 13/16 | 1/8 | -3/16 | 7/8 | 0/1 | 0/1 | 0/1 |
| c[4] = 9/4 | 9/8 | -3/8 | 11/16 | 13/16 | 0/1 | 0/1 |
| c[5] = 19/16 | 1/16 | 3/16 | -1/8 | 0/1 | 17/16 | 0/1 |
| b | 5497/22110 | 2183/4422 | 523/2010 | -1/402 | 0/1 | 0/1 |
All values are exact fractions; the Q15 integrator applies each one as a dyadic m/2^s pair, listed below. The tableau layout is defined in the glossary.
The Q15 integrator applies each nonzero A and b entry to a state value v as (v * m) >> s, an arithmetic right shift that floors. Zero entries are skipped. When exact is no, m/2^s only approximates the fraction and the largest such gap is the record's coeff_quant_error. CSD weight is the length of the shift-add chain the cost model may charge for the multiply by m.
| entry | exact value | m | s | m/2^s | exact | csd weight |
|---|---|---|---|---|---|---|
| A[1][0] | 11/16 | 11 | 4 | 11/2^4 | yes | 3 |
| A[2][0] | -5/16 | -5 | 4 | -5/2^4 | yes | 2 |
| A[2][1] | 15/16 | 15 | 4 | 15/2^4 | yes | 2 |
| A[3][0] | 1/8 | 1 | 3 | 1/2^3 | yes | 1 |
| A[3][1] | -3/16 | -3 | 4 | -3/2^4 | yes | 2 |
| A[3][2] | 7/8 | 7 | 3 | 7/2^3 | yes | 2 |
| A[4][0] | 9/8 | 9 | 3 | 9/2^3 | yes | 2 |
| A[4][1] | -3/8 | -3 | 3 | -3/2^3 | yes | 2 |
| A[4][2] | 11/16 | 11 | 4 | 11/2^4 | yes | 3 |
| A[4][3] | 13/16 | 13 | 4 | 13/2^4 | yes | 3 |
| A[5][0] | 1/16 | 1 | 4 | 1/2^4 | yes | 1 |
| A[5][1] | 3/16 | 3 | 4 | 3/2^4 | yes | 2 |
| A[5][2] | -1/8 | -1 | 3 | -1/2^3 | yes | 1 |
| A[5][4] | 17/16 | 17 | 4 | 17/2^4 | yes | 2 |
| b[0] | 5497/22110 | 32587 | 17 | 32587/2^17 | no | 6 |
| b[1] | 2183/4422 | 32353 | 16 | 32353/2^16 | no | 5 |
| b[2] | 523/2010 | 4263 | 14 | 4263/2^14 | no | 5 |
| b[3] | -1/402 | -163 | 16 | -163/2^16 | no | 4 |
| problem | set | final-state error | share of its set, percent |
|---|---|---|---|
| dahlquist | search | 0.00016747 | 0.04 |
| damped_osc | search | 0.00499072 | 35.29 |
| dc_motor | held-out | 0.032654 | 18.80 |
| pendulum | held-out | 0.0102973 | 1.87 |
| quaternion | held-out | 0.0237928 | 9.98 |
| rc_thermal | held-out | 0.0627153 | 69.35 |
| vanderpol_mild | search | 0.00675648 | 64.67 |
| model | cycles | note |
|---|---|---|
| m0plus_fast | 75 | |
| m0plus_slow | 120 | |
| avr_approx | 382 | avr_approx is an approximate model, shown for context only. |
| metric | value |
|---|---|
| measured_order | 3.04073 |
| order_fit_points | 5 |
| error_constant | 0.063477 |
| stability_real | -2.47998 |
| stability_imag (bisection floor) | 1.71795 |
| csd_weight_total | 48 |
| coeff_quant_error | 6.13388e-06 |
| search_error | 0.00485062 |
| heldout_error | 0.0376551 |
| overflow_margin | 1.93802 |
stability_imag is the smallest imaginary-axis interval the scorer's search can resolve, from 4000 samples and 200 bisection steps, so it is a floor rather than a measured extent: a method whose stability region meets the imaginary axis only at the origin reports that floor and not 0. Read a value at the floor as no resolvable interval. stability_real carries no such floor, because the real-axis interval of these methods is well inside the sampled range.
measured_order is the slope of a log-log fit of float64 final-state error against step size on the dahlquist problem, over the longest usable run of points (order_fit_points of them); it is measured evidence, distinct from the algebraic order that keys the grid. error_constant is the L2 norm of the order-condition residuals one order past the achieved one, a size estimate for the leading truncation term. stability_real and stability_imag are read off the stability region by the bisection described under the table above, along the negative real axis and along the imaginary axis.
csd_weight_total sums CSD weights over the non-trivial coefficients, a proxy for coefficient-arithmetic cost. coeff_quant_error is the largest gap between an exact coefficient and its m/2^s form. search_error and heldout_error are root-mean-square errors over the two problem sets at the fixed cycle budget; heldout_error is the archive fitness. overflow_margin is 1 / max|state| observed at twice the nominal amplitude and must exceed 1.0, meaning a doubled signal still fits in Q15 range.
| problem | set | m0plus_fast | m0plus_fast share, percent | m0plus_slow | m0plus_slow share, percent | avr_approx | avr_approx share, percent |
|---|---|---|---|---|---|---|---|
| dahlquist | search | 0.00016747 | 0.04 | 0.00016747 | 0.0053 | 0.00016747 | 0.027 |
| damped_osc | search | 0.00499072 | 35.29 | 0.00170277 | 0.55 | 0.00257615 | 6.48 |
| vanderpol_mild | search | 0.00675648 | 64.67 | 0.0228966 | 99.44 | 0.00978809 | 93.50 |
| pendulum | held-out | 0.0102973 | 1.87 | 0.0313236 | 27.40 | 0.706123 | 99.94 |
| dc_motor | held-out | 0.032654 | 18.80 | 0.0198013 | 10.95 | 0.00621089 | 0.0077 |
| rc_thermal | held-out | 0.0627153 | 69.35 | 0.0444486 | 55.18 | 0.0144781 | 0.042 |
| quaternion | held-out | 0.0237928 | 9.98 | 0.0152098 | 6.46 | 0.00846189 | 0.014 |
| search_error | search | 0.00485062 | set total | 0.0132562 | set total | 0.00584441 | set total |
| heldout_error | held-out | 0.0376551 | set total | 0.0299177 | set total | 0.353175 | set total |
Each cost model is scored by its own integration, so it has its own per-problem errors and its own two sums, and one share column would describe one of these three while mislabeling the other two. The set column says which total a row belongs to: within one cost model the search rows divide one sum of squares and the held-out rows divide another, and a share is the row's error squared over the sum for its own set. Each set adds to 100 before rounding, so a set printed to two decimals can read 99.99 or 100.01, and a share below a tenth of a percent prints to two significant figures instead so that a small contribution does not read as none. The two rows in bold are those sets' own root mean square values rather than members of a set, which is why they carry the words set total in place of a share; under m0plus_fast they are the record's own search_error and heldout_error, and the other two models store theirs under their own prefix. A row whose error is 0 carries none of its set's total and reads 0. A set holding an overflowed run has an infinite error and so has no usable total, and a set whose errors are all zero has nothing to divide by, so in both cases every share reads n/a rather than being spread over the rows that finished.