grid order 3, 6 stages, cycle bucket 2
This page is the full archive record for this cell's elite. Every number here was produced by the pinned scoring code, and verifier_hash pins which version of it; see the explicit archive for where this cell sits in the grids. The tier and phase label are assigned mechanically.
| A[.][0] | A[.][1] | A[.][2] | A[.][3] | A[.][4] | A[.][5] | |
|---|---|---|---|---|---|---|
| c[0] = 0/1 | 0/1 | 0/1 | 0/1 | 0/1 | 0/1 | 0/1 |
| c[1] = 5/16 | 5/16 | 0/1 | 0/1 | 0/1 | 0/1 | 0/1 |
| c[2] = 7/8 | -1/8 | 1/1 | 0/1 | 0/1 | 0/1 | 0/1 |
| c[3] = 5/16 | 0/1 | 0/1 | 5/16 | 0/1 | 0/1 | 0/1 |
| c[4] = 1/2 | 0/1 | 3/8 | -1/4 | 3/8 | 0/1 | 0/1 |
| c[5] = -3/8 | -1/4 | 1/4 | 1/8 | 0/1 | -1/2 | 0/1 |
| b | 67/840 | 6373/26460 | 127/378 | 5779/26460 | 1/8 | 0/1 |
All values are exact fractions; the Q15 integrator applies each one as a dyadic m/2^s pair, listed below. The tableau layout is defined in the glossary.
The Q15 integrator applies each nonzero A and b entry to a state value v as (v * m) >> s, an arithmetic right shift that floors. Zero entries are skipped. When exact is no, m/2^s only approximates the fraction and the largest such gap is the record's coeff_quant_error. CSD weight is the length of the shift-add chain the cost model may charge for the multiply by m.
| entry | exact value | m | s | m/2^s | exact | csd weight |
|---|---|---|---|---|---|---|
| A[1][0] | 5/16 | 5 | 4 | 5/2^4 | yes | 2 |
| A[2][0] | -1/8 | -1 | 3 | -1/2^3 | yes | 1 |
| A[2][1] | 1/1 | 1 | 0 | 1/2^0 | yes | 1 |
| A[3][2] | 5/16 | 5 | 4 | 5/2^4 | yes | 2 |
| A[4][1] | 3/8 | 3 | 3 | 3/2^3 | yes | 2 |
| A[4][2] | -1/4 | -1 | 2 | -1/2^2 | yes | 1 |
| A[4][3] | 3/8 | 3 | 3 | 3/2^3 | yes | 2 |
| A[5][0] | -1/4 | -1 | 2 | -1/2^2 | yes | 1 |
| A[5][1] | 1/4 | 1 | 2 | 1/2^2 | yes | 1 |
| A[5][2] | 1/8 | 1 | 3 | 1/2^3 | yes | 1 |
| A[5][4] | -1/2 | -1 | 1 | -1/2^1 | yes | 1 |
| b[0] | 67/840 | 20909 | 18 | 20909/2^18 | no | 7 |
| b[1] | 6373/26460 | 31569 | 17 | 31569/2^17 | no | 6 |
| b[2] | 127/378 | 22019 | 16 | 22019/2^16 | no | 6 |
| b[3] | 5779/26460 | 28627 | 17 | 28627/2^17 | no | 6 |
| b[4] | 1/8 | 1 | 3 | 1/2^3 | yes | 1 |
| problem | set | final-state error | share of its set, percent |
|---|---|---|---|
| dahlquist | search | 0.000289541 | 0.0078 |
| damped_osc | search | 0.00912772 | 7.71 |
| dc_motor | held-out | 0.0291007 | 3.13 |
| pendulum | held-out | 0.00178747 | 0.012 |
| quaternion | held-out | 0.0322364 | 3.84 |
| rc_thermal | held-out | 0.15865 | 93.02 |
| vanderpol_mild | search | 0.0315794 | 92.28 |
| model | cycles | note |
|---|---|---|
| m0plus_fast | 63 | |
| m0plus_slow | 105 | |
| avr_approx | 272 | avr_approx is an approximate model, shown for context only. |
| metric | value |
|---|---|
| measured_order | 3.04004 |
| order_fit_points | 5 |
| error_constant | 0.0259445 |
| stability_real | -2.91643 |
| stability_imag (bisection floor) | 1.9163 |
| csd_weight_total | 40 |
| coeff_quant_error | 4.44039e-06 |
| search_error | 0.0189794 |
| heldout_error | 0.082248 |
| overflow_margin | 1.91223 |
stability_imag is the smallest imaginary-axis interval the scorer's search can resolve, from 4000 samples and 200 bisection steps, so it is a floor rather than a measured extent: a method whose stability region meets the imaginary axis only at the origin reports that floor and not 0. Read a value at the floor as no resolvable interval. stability_real carries no such floor, because the real-axis interval of these methods is well inside the sampled range.
measured_order is the slope of a log-log fit of float64 final-state error against step size on the dahlquist problem, over the longest usable run of points (order_fit_points of them); it is measured evidence, distinct from the algebraic order that keys the grid. error_constant is the L2 norm of the order-condition residuals one order past the achieved one, a size estimate for the leading truncation term. stability_real and stability_imag are read off the stability region by the bisection described under the table above, along the negative real axis and along the imaginary axis.
csd_weight_total sums CSD weights over the non-trivial coefficients, a proxy for coefficient-arithmetic cost. coeff_quant_error is the largest gap between an exact coefficient and its m/2^s form. search_error and heldout_error are root-mean-square errors over the two problem sets at the fixed cycle budget; heldout_error is the archive fitness. overflow_margin is 1 / max|state| observed at twice the nominal amplitude and must exceed 1.0, meaning a doubled signal still fits in Q15 range.
| problem | set | m0plus_fast | m0plus_fast share, percent | m0plus_slow | m0plus_slow share, percent | avr_approx | avr_approx share, percent |
|---|---|---|---|---|---|---|---|
| dahlquist | search | 0.000289541 | 0.0078 | 0.00016747 | 0.0041 | 4.53999e-05 | 0.0023 |
| damped_osc | search | 0.00912772 | 7.71 | 0.004842 | 3.47 | 0.00211001 | 4.97 |
| vanderpol_mild | search | 0.0315794 | 92.28 | 0.0255494 | 96.53 | 0.00922239 | 95.02 |
| pendulum | held-out | 0.00178747 | 0.012 | 0.0108821 | 1.47 | 0.137523 | 95.22 |
| dc_motor | held-out | 0.0291007 | 3.13 | 0.0193128 | 4.62 | 0.008659 | 0.38 |
| rc_thermal | held-out | 0.15865 | 93.02 | 0.0848337 | 89.08 | 0.0286537 | 4.13 |
| quaternion | held-out | 0.0322364 | 3.84 | 0.019767 | 4.84 | 0.00724804 | 0.26 |
| search_error | search | 0.0189794 | set total | 0.0150138 | set total | 0.00546219 | set total |
| heldout_error | held-out | 0.082248 | set total | 0.0449413 | set total | 0.0704647 | set total |
Each cost model is scored by its own integration, so it has its own per-problem errors and its own two sums, and one share column would describe one of these three while mislabeling the other two. The set column says which total a row belongs to: within one cost model the search rows divide one sum of squares and the held-out rows divide another, and a share is the row's error squared over the sum for its own set. Each set adds to 100 before rounding, so a set printed to two decimals can read 99.99 or 100.01, and a share below a tenth of a percent prints to two significant figures instead so that a small contribution does not read as none. The two rows in bold are those sets' own root mean square values rather than members of a set, which is why they carry the words set total in place of a share; under m0plus_fast they are the record's own search_error and heldout_error, and the other two models store theirs under their own prefix. A row whose error is 0 carries none of its set's total and reads 0. A set holding an overflowed run has an infinite error and so has no usable total, and a set whose errors are all zero has nothing to divide by, so in both cases every share reads n/a rather than being spread over the rows that finished.