grid order 2, 6 stages, cycle bucket 3
This page is the full archive record for this cell's elite. Every number here was produced by the pinned scoring code, and verifier_hash pins which version of it; see the explicit archive for where this cell sits in the grids. The tier and phase label are assigned mechanically.
| A[.][0] | A[.][1] | A[.][2] | A[.][3] | A[.][4] | A[.][5] | |
|---|---|---|---|---|---|---|
| c[0] = 0/1 | 0/1 | 0/1 | 0/1 | 0/1 | 0/1 | 0/1 |
| c[1] = 13/16 | 13/16 | 0/1 | 0/1 | 0/1 | 0/1 | 0/1 |
| c[2] = -9/32 | -1/4 | -1/32 | 0/1 | 0/1 | 0/1 | 0/1 |
| c[3] = 11/16 | -7/32 | 1/32 | 7/8 | 0/1 | 0/1 | 0/1 |
| c[4] = 47/32 | 0/1 | 3/32 | 17/32 | 27/32 | 0/1 | 0/1 |
| c[5] = -1/2 | -9/32 | -9/32 | -3/16 | -1/4 | 1/2 | 0/1 |
| b | 471/832 | 205/832 | 0/1 | -1/32 | 7/32 | 0/1 |
All values are exact fractions; the Q15 integrator applies each one as a dyadic m/2^s pair, listed below. The tableau layout is defined in the glossary.
The Q15 integrator applies each nonzero A and b entry to a state value v as (v * m) >> s, an arithmetic right shift that floors. Zero entries are skipped. When exact is no, m/2^s only approximates the fraction and the largest such gap is the record's coeff_quant_error. CSD weight is the length of the shift-add chain the cost model may charge for the multiply by m.
| entry | exact value | m | s | m/2^s | exact | csd weight |
|---|---|---|---|---|---|---|
| A[1][0] | 13/16 | 13 | 4 | 13/2^4 | yes | 3 |
| A[2][0] | -1/4 | -1 | 2 | -1/2^2 | yes | 1 |
| A[2][1] | -1/32 | -1 | 5 | -1/2^5 | yes | 1 |
| A[3][0] | -7/32 | -7 | 5 | -7/2^5 | yes | 2 |
| A[3][1] | 1/32 | 1 | 5 | 1/2^5 | yes | 1 |
| A[3][2] | 7/8 | 7 | 3 | 7/2^3 | yes | 2 |
| A[4][1] | 3/32 | 3 | 5 | 3/2^5 | yes | 2 |
| A[4][2] | 17/32 | 17 | 5 | 17/2^5 | yes | 2 |
| A[4][3] | 27/32 | 27 | 5 | 27/2^5 | yes | 3 |
| A[5][0] | -9/32 | -9 | 5 | -9/2^5 | yes | 2 |
| A[5][1] | -9/32 | -9 | 5 | -9/2^5 | yes | 2 |
| A[5][2] | -3/16 | -3 | 4 | -3/2^4 | yes | 2 |
| A[5][3] | -1/4 | -1 | 2 | -1/2^2 | yes | 1 |
| A[5][4] | 1/2 | 1 | 1 | 1/2^1 | yes | 1 |
| b[0] | 471/832 | 9275 | 14 | 9275/2^14 | no | 5 |
| b[1] | 205/832 | 32295 | 17 | 32295/2^17 | no | 5 |
| b[3] | -1/32 | -1 | 5 | -1/2^5 | yes | 1 |
| b[4] | 7/32 | 7 | 5 | 7/2^5 | yes | 2 |
| problem | set | final-state error | share of its set, percent |
|---|---|---|---|
| dahlquist | search | 4.53999e-05 | 0.00044 |
| damped_osc | search | 0.00481708 | 4.99 |
| dc_motor | held-out | 0.0342418 | 14.27 |
| pendulum | held-out | 0.00653622 | 0.52 |
| quaternion | held-out | 0.0243705 | 7.23 |
| rc_thermal | held-out | 0.0800461 | 77.98 |
| vanderpol_mild | search | 0.0210101 | 95.01 |
| model | cycles | note |
|---|---|---|
| m0plus_fast | 72 | |
| m0plus_slow | 100 | |
| avr_approx | 340 | avr_approx is an approximate model, shown for context only. |
| metric | value |
|---|---|
| measured_order | 1.98911 |
| order_fit_points | 8 |
| error_constant | 0.290592 |
| stability_real | -2.28696 |
| stability_imag (bisection floor) | 1.1669 |
| csd_weight_total | 38 |
| coeff_quant_error | 4.69501e-06 |
| search_error | 0.012445 |
| heldout_error | 0.0453225 |
| overflow_margin | 1.84879 |
stability_imag is the smallest imaginary-axis interval the scorer's search can resolve, from 4000 samples and 200 bisection steps, so it is a floor rather than a measured extent: a method whose stability region meets the imaginary axis only at the origin reports that floor and not 0. Read a value at the floor as no resolvable interval. stability_real carries no such floor, because the real-axis interval of these methods is well inside the sampled range.
measured_order is the slope of a log-log fit of float64 final-state error against step size on the dahlquist problem, over the longest usable run of points (order_fit_points of them); it is measured evidence, distinct from the algebraic order that keys the grid. error_constant is the L2 norm of the order-condition residuals one order past the achieved one, a size estimate for the leading truncation term. stability_real and stability_imag are read off the stability region by the bisection described under the table above, along the negative real axis and along the imaginary axis.
csd_weight_total sums CSD weights over the non-trivial coefficients, a proxy for coefficient-arithmetic cost. coeff_quant_error is the largest gap between an exact coefficient and its m/2^s form. search_error and heldout_error are root-mean-square errors over the two problem sets at the fixed cycle budget; heldout_error is the archive fitness. overflow_margin is 1 / max|state| observed at twice the nominal amplitude and must exceed 1.0, meaning a doubled signal still fits in Q15 range.
| problem | set | m0plus_fast | m0plus_fast share, percent | m0plus_slow | m0plus_slow share, percent | avr_approx | avr_approx share, percent |
|---|---|---|---|---|---|---|---|
| dahlquist | search | 4.53999e-05 | 0.00044 | 4.53999e-05 | 0.00022 | 4.53999e-05 | 0.0001 |
| damped_osc | search | 0.00481708 | 4.99 | 0.00477181 | 2.48 | 0.00779566 | 3.01 |
| vanderpol_mild | search | 0.0210101 | 95.01 | 0.0298988 | 97.52 | 0.0442206 | 96.99 |
| pendulum | held-out | 0.00653622 | 0.52 | 0.00591903 | 0.92 | 0.125739 | 97.32 |
| dc_motor | held-out | 0.0342418 | 14.27 | 0.0244483 | 15.62 | 0.0070664 | 0.31 |
| rc_thermal | held-out | 0.0800461 | 77.98 | 0.0537408 | 75.48 | 0.018054 | 2.01 |
| quaternion | held-out | 0.0243705 | 7.23 | 0.017477 | 7.98 | 0.0077079 | 0.37 |
| search_error | search | 0.012445 | set total | 0.0174806 | set total | 0.0259245 | set total |
| heldout_error | held-out | 0.0453225 | set total | 0.0309284 | set total | 0.0637291 | set total |
Each cost model is scored by its own integration, so it has its own per-problem errors and its own two sums, and one share column would describe one of these three while mislabeling the other two. The set column says which total a row belongs to: within one cost model the search rows divide one sum of squares and the held-out rows divide another, and a share is the row's error squared over the sum for its own set. Each set adds to 100 before rounding, so a set printed to two decimals can read 99.99 or 100.01, and a share below a tenth of a percent prints to two significant figures instead so that a small contribution does not read as none. The two rows in bold are those sets' own root mean square values rather than members of a set, which is why they carry the words set total in place of a share; under m0plus_fast they are the record's own search_error and heldout_error, and the other two models store theirs under their own prefix. A row whose error is 0 carries none of its set's total and reads 0. A set holding an overflowed run has an infinite error and so has no usable total, and a set whose errors are all zero has nothing to divide by, so in both cases every share reads n/a rather than being spread over the rows that finished.