Cell p2 s5 b2

grid order 2, 5 stages, cycle bucket 2

This page is the full archive record for this cell's elite. Every number here was produced by the pinned scoring code, and verifier_hash pins which version of it; see the explicit archive for where this cell sits in the grids. The tier and phase label are assigned mechanically.

tier
heldout_verified
phase label
search result
tableau_hash
6d0004de713f0a8e38ede54c91b635a5843a38e5480b66a9eb80359d49171a19
verifier_hash
de5bec229ffa404a85b9172fdc808ef6035716c3df8b308c816e90ffb54fd6e9
cycle_id
33
seed
3201
directive_id
D-0032
hypothesis_id
none
recorded
2026-08-30 01:45 CT (stored 2026-08-30T06:45:41Z UTC)

Tableau

A[.][0]A[.][1]A[.][2]A[.][3]A[.][4]
c[0] = 0/10/10/10/10/10/1
c[1] = 7/87/80/10/10/10/1
c[2] = 15/167/3223/320/10/10/1
c[3] = 13/321/32-3/169/160/10/1
c[4] = 0/11/32-9/163/327/160/1
b309/896447/8960/15/320/1

All values are exact fractions; the Q15 integrator applies each one as a dyadic m/2^s pair, listed below. The tableau layout is defined in the glossary.

Raw coefficient representation (m/2^s)

The Q15 integrator applies each nonzero A and b entry to a state value v as (v * m) >> s, an arithmetic right shift that floors. Zero entries are skipped. When exact is no, m/2^s only approximates the fraction and the largest such gap is the record's coeff_quant_error. CSD weight is the length of the shift-add chain the cost model may charge for the multiply by m.

entryexact valuemsm/2^sexactcsd weight
A[1][0]7/8737/2^3yes2
A[2][0]7/32757/2^5yes2
A[2][1]23/3223523/2^5yes3
A[3][0]1/32151/2^5yes1
A[3][1]-3/16-34-3/2^4yes2
A[3][2]9/16949/2^4yes2
A[4][0]1/32151/2^5yes1
A[4][1]-9/16-94-9/2^4yes2
A[4][2]3/32353/2^5yes2
A[4][3]7/16747/2^4yes2
b[0]309/896226011622601/2^16no6
b[1]447/896326951632695/2^16no4
b[3]5/32555/2^5yes2

Per problem

Final-state error of this tableau on each problem, integrated in Q15 under m0plus_fast at the fixed cycle budget. Bar length is error on a log scale; the printed value is exact. dahlquist, damped_osc and vanderpol_mild are the search set the optimizer sees; the other four are the held-out set that decides archive fitness, and on several problems floor rounding dominates the method choice, so bars can look similar across very different tableaus. The share column gives each problem's part of its own set's sum of squares, because both aggregates are a root mean square: the three search rows share one total and the four held-out rows share another, and a share from one set never adds to a share from the other. Each set adds to 100 before rounding, so a set printed to two decimals can read 99.99 or 100.01. A problem that finished with no error carries none of its set's total and reads 0. A set holding an overflowed run has no usable total, and neither has a set whose errors are all zero, so in both cases the shares read n/a.
1e-51e-41e-31e-21e-1dahlquistdahlquist: 4.53999e-054.53999e-05damped_oscdamped_osc: 0.001421590.00142159dc_motordc_motor: 0.03216550.0321655pendulumpendulum: 0.01628010.0162801quaternionquaternion: 0.02556010.0255601rc_thermalrc_thermal: 0.09693920.0969392vanderpol_mildvanderpol_mild: 0.01462250.0146225
Every plotted bar, in one table (7 rows)
problemsetfinal-state errorshare of its set, percent
dahlquistsearch4.53999e-050.00095
damped_oscsearch0.001421590.94
dc_motorheld-out0.03216559.12
pendulumheld-out0.01628012.34
quaternionheld-out0.02556015.76
rc_thermalheld-out0.096939282.79
vanderpol_mildsearch0.014622599.06

Cycle counts (n_states = 1)

modelcyclesnote
m0plus_fast57
m0plus_slow82
avr_approx272avr_approx is an approximate model, shown for context only.

Score

metricvalue
measured_order2.01579
order_fit_points8
error_constant0.132725
stability_real-1.75321
stability_imag (bisection floor)0.00168692
csd_weight_total31
coeff_quant_error2.17983e-06
search_error0.00848217
heldout_error0.0532686
overflow_margin1.96781

stability_imag is the smallest imaginary-axis interval the scorer's search can resolve, from 4000 samples and 200 bisection steps, so it is a floor rather than a measured extent: a method whose stability region meets the imaginary axis only at the origin reports that floor and not 0. Read a value at the floor as no resolvable interval. stability_real carries no such floor, because the real-axis interval of these methods is well inside the sampled range.

How to read this

measured_order is the slope of a log-log fit of float64 final-state error against step size on the dahlquist problem, over the longest usable run of points (order_fit_points of them); it is measured evidence, distinct from the algebraic order that keys the grid. error_constant is the L2 norm of the order-condition residuals one order past the achieved one, a size estimate for the leading truncation term. stability_real and stability_imag are read off the stability region by the bisection described under the table above, along the negative real axis and along the imaginary axis.

csd_weight_total sums CSD weights over the non-trivial coefficients, a proxy for coefficient-arithmetic cost. coeff_quant_error is the largest gap between an exact coefficient and its m/2^s form. search_error and heldout_error are root-mean-square errors over the two problem sets at the fixed cycle budget; heldout_error is the archive fitness. overflow_margin is 1 / max|state| observed at twice the nominal amplitude and must exceed 1.0, meaning a doubled signal still fits in Q15 range.

Every per-problem error, by cost model

problemsetm0plus_fastm0plus_fast share, percentm0plus_slowm0plus_slow share, percentavr_approxavr_approx share, percent
dahlquistsearch4.53999e-050.000954.53999e-050.000310.000167470.0012
damped_oscsearch0.001421590.940.001789470.490.01145775.71
vanderpol_mildsearch0.014622599.060.025542899.510.046564494.29
pendulumheld-out0.01628012.340.042070926.361.7376199.99
dc_motorheld-out0.03216559.120.02176127.050.005844280.0011
rc_thermalheld-out0.096939282.790.064232461.450.01758440.01
quaternionheld-out0.02556015.760.01857535.140.0003793214.8e-06
search_errorsearch0.00848217set total0.0147833set total0.0276861set total
heldout_errorheld-out0.0532686set total0.0409706set total0.868854set total

Each cost model is scored by its own integration, so it has its own per-problem errors and its own two sums, and one share column would describe one of these three while mislabeling the other two. The set column says which total a row belongs to: within one cost model the search rows divide one sum of squares and the held-out rows divide another, and a share is the row's error squared over the sum for its own set. Each set adds to 100 before rounding, so a set printed to two decimals can read 99.99 or 100.01, and a share below a tenth of a percent prints to two significant figures instead so that a small contribution does not read as none. The two rows in bold are those sets' own root mean square values rather than members of a set, which is why they carry the words set total in place of a share; under m0plus_fast they are the record's own search_error and heldout_error, and the other two models store theirs under their own prefix. A row whose error is 0 carries none of its set's total and reads 0. A set holding an overflowed run has an infinite error and so has no usable total, and a set whose errors are all zero has nothing to divide by, so in both cases every share reads n/a rather than being spread over the rows that finished.